Binding Machine Manual Wire WM703

(6 customer reviews)

$895.00 Excl. GST

This robust WM703 Manual Wire Machine is the latest machine from NZ Binding and is designed to meet the requirements of a busy office. The WM703 is built to last and the high punch capacity means documents are wire bound easily and efficiently. The WM703 comes complete with an adjustable clamp that allows wires to be consistently closed evenly.

The WM703 is ideal for frequent use.

This machine is eligible for nationwide free delivery, comes with a one year warranty and is fully compatible with our range of 34-Loop 3:1 Metal Wires and Binding Covers.

 

In stock

Description

Tough metal construction Can punch through 28 sheets of 80 gsm paper Bind documents up to 120 sheets of 80 gsm paper (14 mm thickness) Uses 34-loop Metal Wires from 6 mm to 14 mm Disengageable Pins to bind custom sized documents Guide that allows for A3 binding in two passes Adjustable margin for customisable binding Adjustable clamp for greater wire closing accuracy Removable waste paper tray.

WM703 Manual Wire Binding Machine

Welcome to New Zealand Binding, in this video we are going to demonstrate the WM703 which is our professional level 3 to 1 Manual Wire machine.

First you’ll need to check the pins are in the correct position for the page dimension you are using, in this case all pushed in for A4.

Before you start any binding always test with a piece of scrap paper to ensure that the holes are centred along the length of the document.

You can adjust the position of the holes by moving the paper guide and margin lever.

Now that we’re ready to bind make sure pages are level and place the document into the machine ensuring it is tight against the paper guide.

When ready pull down the large handle on the right to punch the paper and put the pages face down on the desk.

We recommend punching no more than 28 sheets of 80 gsm or 2 clear acetate covers in one go to avoid damaging the machine.

Once all pages have been punched for a neat finish move the back page to the front as this will hide the join inside your document once bound.

Make sure all holes line up and place document on the edge of the desk with a slight overhang.

Turn the dial on top of the machine to adjust the clamp to the size of the wire you are using.

Thread the wire through the holes just enough so that the C opening is facing towards you.

Pinch the bottom of the document just above the wire tightly to lock it in position and carefully place the document in the magnetic clamp, ensuring the wire is flat.

Pull the handle towards you slowly until the clamp grips the wire and then squeeze firmly.

Remove the document and ensure wire is evenly clamped; the clamp can be adjusted using the dial if required.

The join should be clearly visible but closing the back page will conceal this inside the document.

Your document is now ready.

Don’t forget when binding to empty the tray regularly as this will avoid the machine getting jammed.

Additional information

Weight 0.000000 g

6 reviews for Binding Machine Manual Wire WM703

  1. Bo Kearns (verified owner)

    After our old metal binding machine broke Adrian from NZ Binding recommended a new unit.
    He was able to give a very competitive quote and even offered to bring the machine to the office to demonstrate how it works. This was great because not only did we get the unit the same day we ordered it, Adrian was also able to give some great pointers, on how to use the machine and make binding easier. Overall the whole experience was excellent! Great quality machine and phenomenal customer service.

  2. Stephen Wickens (verified owner)

    NZ Binding is a company which is easy to deal with. Adrian has been especially helpful in following up our online order which included consumables which were incompatible with the machine we ordered. Then, following the delivery of the machine another phone call to ensure that all was in order. Good old fashioned customer service is a pretty rare attribute these days. But NZ Binding lives it!!

  3. jeremy (verified owner)

    Adrian provided good information when we also phoned, we purchased and received it the following day.
    I did exactly what we needed to do and more.
    We would highly recommending NZ Binding for all your binding needs.

  4. Barfoot Thompson South Auckland Commercial (verified owner)

    Upon needing an upgrade to our old wire binding machine we weren’t sure where to go next, so Adrian came out to our office with a selection of new machines to demonstrate, to help us select the right one for our needs. After trialing the machines we opted for the Manual Wire Binding Machine which was a great choice – simple to use and no fuss. Not only do NZ Binding have a great selection of choice, their customer service is outstanding! Highly recommended!!

  5. Harrows (verified owner)

    I found Adrian from NZ Binding very helpful when we are looking at replacing our binding machine – prompt reply and excellent customer service. The binding machine is great and very easy to use. The youtube video that is available on the product page on their website shows a step by step guide on how you use the binding machine.

  6. joycelyn.woo (verified owner)

    NZ Binding provided excellent service with an urgent overnight order required! The order was made past 5pm and arrived first thing the next day. Dion went above and beyond to get us the delivery from Tauranga to Auckland. NZ Binding has also made it very easy to select the right products, with clear guides and demo videos to follow. Highly recommend going to NZ Binding for all your binding needs!

Only logged in customers who have purchased this product may leave a review.

0

Your Cart